Rescue Life is an external defibrillator with monitor, designed for use both in hospitals and in out-of-hospital emergency situations, following BLS and ALS protocols. This device is lightweight, easy to transport, and features an ergonomic design finished down to the smallest detail. The IPX4 classification ensures operation even in adverse weather conditions. It is entirely made in Italy.

Technical specifications:
- SpO2 and pacemaker: models available with pacemaker and SpO2
- ECG module: monitoring of up to 12 leads
- NIBP: Sun Tech Medical Advantage A+ technology
- Display: color TFT LCD, 5.7” or 7”
- Memory: 4 GB flash drive for 300 hours of recording

Operating modes:
- Manual: for trained healthcare personnel
- AED: for authorized personnel, with voice instructions and on-screen messages
- Advisory: alerts when defibrillation is recommended

Display:
- Color TFT LCD 5.7” (320x240 pixels)
- ECG via paddles or patient cable
- Filters: 50/60 Hz baseline, EMG
- Heartbeat indicator

ECG monitoring:
- Bandwidth: 0.5 to 120 Hz
- ECG parameter filters: speed 5, 10, 25, 50 mm/sec
- Gain: 2.5, 5, 10, 20, 40 mm/mV
- Digital HR display: 20 to 300 BPM
- Configurable HR alarm: up to 250 BPM

Pulse oximeter (SpO2):
- Oxygen saturation: 0 to 100%
- Pulse rate: 30 to 250 beats/min
- SpO2 accuracy: 70-100% ± 2%
- SpO2 alarms: minimum 50%

Non-invasive pacemaker:
- Rectangular waveform, pulse duration: 22 ms
- Operating mode: fixed or on demand
- Pulse rate: 0 to 180 ppm
- Pulse voltage: MAX 150 V

NIBP:
- Oscillometric technique
- Accuracy compliant with ANSI/AAMI SP10-2002, EN 1060-4
- Patient application: adult/pediatric/neonatal
- Range mmHg: adult/pediatric/neonatal
- Systolic: 40-260 / 40-160 / 40-130
- MAP: 26-220 / 26-133 / 26-110
- Diastolic: 20-200 / 20-120 / 20-100

Printer:
- Manual/automatic printing mode
- Built-in thermal printer
- Print speed: 5, 10, 25 and 50 mm/sec
- Paper width: 58 mm

Safety:
- Two handles for safety during shock delivery
- Class CF ECG monitoring isolation
- Internal energy discharge after 30 sec. in standby

Power supply:
- Internal Ni-MH or Li-ion battery
- Universal charger 110/240 VAC, 50/60 Hz
- Dimensions: 36x24x34 cm
- Weight: 5.5 kg

General information:
- Memory: 4 GB internal flash
- Supplied with: internal Li-ion battery, printer, 5-lead patient cable, 1 roll of paper, 2 disposable paddles, 2 reusable adult and pediatric electrodes, universal charger