The Rescue Life is an external defibrillator with monitor, designed for use both in hospital and in out-of-hospital emergency situations, following the BLS and ALS protocols. This device is lightweight, easy to transport and has an ergonomic design with attention to detail. The IPX4 rating ensures operation even in adverse weather conditions. The production is entirely Italian.

Technical features:
- SpO2 and Pacemaker: models available with pacemaker and SpO2
- ECG module: control up to 12 leads
- NIBP: Advantage A+ technology from Sun Tech Medical
- Display: 5.7'' or 7'' color TFT LCD
- Memory: 4GB flash disk for 300 hours of recording

Operating modes:
- Manual: for trained healthcare personnel
- AED: for authorized personnel, with voice instructions and messages on the display
- Advisory: warns when defibrillation is recommended

Display:
- TFT Color LCD 5.7'' (320x240 pixels)
- ECG via plates or patient cable
- Filters: 50/60 Hz baseline, EMG
- Heart rate indicator

ECG monitoring:
- Bandwidth: 0.5 to 120 Hz
- Filters for ECG parameters: speed 5, 10, 25, 50 mm/sec
- Gain: 2.5, 5, 10, 20, 40 mm/mV
- HR Digital Report: 20 to 300 BPM
- Configurable HR alarm: up to 250 BPM

Pulse oximeter (SpO2):
- Oxygen saturation: 0 to 100%
- Pulse: 30 to 250 beats/min
- SpO2 accuracy: 70-100% ± 2%
- SpO2 alarms: minimum 50%

Non-invasive pacemaker:
- Rectangular wave, pulse time: 22 ms
- Operating mode: fixed or on request
- Pulse rate: 0 to 180 ppm
- Pulse voltage: MAX 150 V

NIBP:
- Oscillometric technique
- Accuracy according to ANSI/AAMI SP10-2002, EN 1060-4
- Application on patient: adult/pediatric/neonatal
- mmHg range: adult/pediatric/neonatal
- Systolic: 40-260 / 40-160 / 40-130
- MAP: 26-220 / 26-133 / 26-110
- Diastolic: 20-200 / 20-120 / 20-100

Printer:
- Manual/auto-print mode
- Integrated thermal printer
- Print speeds: 5, 10, 25 and 50 mm/sec
- Paper width: 58 mm

Safety:
- Two handles for safety during the shock
- Class CF ECG detection isolation
- Internal energy discharge after 30 sec. of standby

Power supply:
- Internal Ni-Mh or Li-ion battery
- Universal charger 110/240 VAC, 50/60 Hz
- Size: 36x24x34 cm
- Weight: 5.5 kg

General information:
- Memory: 4GB internal flash
- Equipment: Internal Li-ion battery, Printer, 5-lead patient cable, 1 roll of paper, 2 disposable plates, 2 reusable adult and pediatric electrodes, Universal charger