Smarty Saver Plus Automatic Defibrillator

The best portable defibrillator (automated external defibrillator) for the rapid, simple and effective treatment of sudden cardiac arrest (SCA) and to guide the administration of cardiopulmonary resuscitation (CPR).

The Smarty Series is A.M.I. Italia’s new line of defibrillators. It can be easily used by anyone in the medical field (e.g. ambulance, emergency department, etc.) and also in non-medical settings (e.g. public or private places).

Quality CPR:

Thanks to an external wireless Q-CPR module, connected to the device via Bluetooth, and an 8-LED bar positioned on the keypad, together with the audible metronome and prompts, the operator has real-time support for correctly performing the rate and depth of compressions during cardiopulmonary resuscitation (according to International Guidelines).

Model:                             

Code SM4-B1004: Automatic

Maximum energy:              

200J (nominal)

Waveform:                   

Automatically adaptive biphasic truncated exponential (BTE)                                             

according to patient impedance

Shock protocol:        

Adult: incremental, first shock 150J – subsequent shocks 200J

Pediatric: fixed 50J

Charge time

from shock prompt*: IEC60601-2-4

≤ 9 sec with a 150J shock

≤ 12 sec with a 200J shock

Charge time

from the start of analysis*: IEC60601-2-4

≤ 13 sec with a 150J shock

≤ 16 sec with a 200J shock

Analysis time: IEC/EN 60601-2-4

from 4 to 15 seconds

Impedance range: 20-200 Ohms

Sensitivity: 97% (IEC/EN 60601-2-4)

Specificity: 99% (IEC/EN 60601-2-4)

Controls:

Semi-automatic mode, 4 buttons: ON/OFF, shock,

patient selector (adult/pediatric)

Automatic mode, 3 buttons: ON/OFF, patient selector

(adult/pediatric)

Indicator lights: – Device status: 2 red/green LEDs

– PAD placement: 2 red LEDs

– Do not touch the patient: 2 red LEDs

– Touch the patient: 1 green LED

– Adult patient: 1 green LED

– Pediatric patient: 1 green LED

– ON/OFF button: 2 green LEDs

– Shock button: 8 red LEDs

– CPR quality feedback bar with 8 LEDs:

2 red + 2 orange + 2 yellow + 2 green

– Bluetooth connection

with active “Q-CPR” module: 1 green LED

Update: Via USB cable

External memory card

*on a patient with an impedance of 50 Ohms and with a fully charged new battery                                   

STRUCTURE

Dimensions: 200x213x71mm (handle closed);

257x213x71mm (handle open)

Weight: 1.62 Kg (with battery and PADs)

Semi-rigid carrying case

Universal single-use pads

Non-rechargeable battery

External Bluetooth CPR quality feedback sensor

Single-use patch for Q-CPR module

User guide