Ermenrich Ping MK40 Digital Clamp Meter
by credit card, Paypal and bank transfer.
with BRT, DPD and FedEx couriers
via Whatsapp + 39.371.43.61.201
The Ermenrich Ping MK40 digital clamp meter measures not only alternating current, but also direct current as well as 6 other parameters: voltage (direct and alternating), resistance, frequency, capacity, duty cycle and temperature. It provides additional features that make it the indispensable gripper to solve the problems of amateur and professional users.
Measurements are made using the true RMS value and the results are more accurate. There is a low-frequency filter (LPF) that isolates different harmonics, increasing the reliability of measurements. To compensate for residual magnetization during direct current measurement, you can set it to zero (DCA Zero).
The continuity mode is one of the basic operating modes of current clamp meters. It helps identify open circuits or short circuits. Diodes can also be tested to identify faults. In NCV (high-voltage non-contact detection) mode, the device detects hidden wiring and sockets that contain electricity.
The LowZ feature is not found on all devices. When used, the digital clamp meter switches to low impedance mode, which is very low resistance. This greatly increases the accuracy of voltage measurements, which could drop due to interference from nearby electrical networks or devices. In LowZ mode, the influence of interference on measurement accuracy is minimized.
The device runs on standard batteries. It features a built-in flashlight for working in dark environments and a data lock feature that allows you to access on-screen readings after measurements, locking the result to the screen.
Key features:
- Safe measurement of AC and DC current without interrupting the circuit
- Functions of voltmeter (DC and AC voltage measurement), ohmmeter, frequency meter, capacitance meter, duty cycle meter, thermocouple sensor
- Low impedance voltmeter function (LowZ), low resistance voltage measurement
- Low-pass filter, DC zeroing, and true RMS calculation for improved measurement reliability
- Lock screen readings, data lock function
The kit includes:
- Current clamp meter
- Test Probes
- Case
- User Manual & Warranty Card
| Brand | Ermenrich |
| Guarantee | 5 лет |
| EAN | 5905555017471 |
| Package size (LxWxH) | 22x11x4 cm |
| Shipping Weight | 0.44 kg |
| Select the measurement limit | automatic, manual |
| Basic functions | voltmeter, ammeter, ohmmeter, capacitance meter, frequency meter, duty cycle meter, thermocouple |
| DC voltage measurement limit | 600 mV/6 V/60 V/600 V: Error ±(0.5%+5) |
| AC voltage measurement limit | 4/40/400/600 V 6/60/600/600 V: Error ±(0.8%+5) |
| DC Current Measurement Limit | 60/600 A: Error ±(2.5%+5) |
| AC Current Measurement Limit | 60/600 A: ± error (2.5%+5) |
| Resistance measurement limit | 600 Ω/6 kΩ/60 kΩ/600 kΩ/6 MΩ/60 MΩ: ±(1.0%+5) error |
| Capacity measurement limit | 4 nF/40 nF/400 nF/4 μF/40 μF/400 μF: ±(4.0%+5) error |
| Frequency measurement limits | 10 Hz/100 Hz/1 kHz/10 kHz/100 kHz/1 MHz/10 MHz: Error ±(1.0%+3) |
| Duty cycle measurement range | 1–99%: Error ±(3.0%+3) |
| Diode Tester | Yes |
| Non-contact phase tester (NCV) | Yes |
| True RMS value | Yes |
| Hold function (fixed measurement) | Yes |
| Limit value function (Min/Max) | Yes |
| DCA Zero | Yes |
| Low Pass Filter (LPF) | Yes |
| Low impedance voltage measurement (LowZ) | Yes |
| Overvoltage category | CAT III 600 V |
| Maximum display value | 6000 |
| Display backlight | Yes |
| Flashing light | Yes |
| Safety standards | EN61010-1,-2-030 EN61010-2-033 EN61326-1 |
| Operating Temperature Range, °C | -40 — 1000 |
| Continuity testing | Yes |
| Feeding | 2 x AAA batteries (not included) |
| Low battery indicator | Yes |
| Auto Power Off | Yes |
