MAGUS 10PLL 10х/0.25 Plan L WD 5 mm Lens

The resolution limit of the 10х/0.25 lens is 1.1μm.
Chromatic aberrations are corrected for blue and red light, spherical aberration is corrected for green light, and field curvature is corrected to 90% of the diameter of the field of view.

The goal is infinitely correct. The parfocal distance is 45 mm. When using a 10/22 mm eyepiece, the diameter of the field of view will be 2.2 mm. Designed to work with samples without cover glass.

The 10x metallurgical lens has a long working distance of 5mm. The working distance is the distance from the front lens of the objective to the object of study, at which the image of the object is in focus. Objects of study may have pronounced topography, for example, samples of printed circuit boards with different levels of electronic components and semiconductors. A large working distance prevents accidental damage to the objective lens or specimen during focusing and when the revolver is turned to change objectives.

The lower limit of the possible magnification of the microscope when using a 10х objective lens is 125x. A lower magnification would not allow the lens details to be distinguished in the image produced by the lens. The upper limit of possible magnification when using a 10х objective lens is 250x. A higher magnification is considered 'useless' because it does not provide new details in the image of the object.
With a 10х/0.25 objective, use eyepieces with a magnification of 12.5x to 25x.

Planachromatic lenses produce an image that is equally focused on the center and sides with minimal distortion. This feature is used to capture digital images and to use wide-field eyepieces with a 22 mm field of view.

Compatibility:

• Metallographic microscope MAGUS Metal 600
• Metallographic microscope MAGUS Metal 630
• Metallographic microscope MAGUS Metal 650
• MAGUS Metal V700 Inverted Metallographic Microscope