MAGUS CHD40 Digital Camera

The MAGUS CHD40 is a camera model for integration with a microscope. The camera shoots in 4K resolution (3840x2160 px) and can automatically convert the image to Full HD (1920x1080 px) if required by an external monitor. The device has three types of interfaces: HDMI for connecting to a TV, monitor or projector, as well as USB 3.0 and Wi-Fi for connecting to a computer. The frame rate is 30 fps regardless of the type of connection. The camera is equipped with built-in software that, in addition to taking photos and recording videos, allows you to edit the image and even take measurements of the observed object. The device generates a high-quality image without lag or tearing, and the object is clearly visible, without distortion, even if it is moving.

Sensor

Inside, the camera is a Starvis SONY color CMOS sensor. These sensors use backlight technology that provides high light sensitivity with a small array size. The sensor size in the MAGUS CHD40 camera is 1/1.2' with a pixel size of 2.9x2.9 μm. The light sensitivity of the device is 1028 mV with a shutter speed of 1/30 of a second - the camera can take high-quality photos in low light conditions. To achieve an extremely wide field of view without deformation, use an adapter with a magnification of 0.75x–1x.

Software

The camera is ready to use thanks to a variety of applications (equipped with built-in software and software installed from the included software CD). It can take photographs, record videos, measure linear and angular dimensions of objects and their structures, and edit images. To take measurements, be sure to first calibrate the software for each objective using a calibration slide. You can connect the camera to a TV, monitor or projector via the HDMI interface, and to a computer via the USB 3.0 or Wi-Fi interface. Connecting via HDMI or USB interfaces results in a 4K resolution image when connected to a computer via a Wi-Fi adapter creates a Full HD image.

Pairing with other devices

The camera supports additional devices. You can connect a mouse (included) to the USB connector. Working with it will prevent vibrations that occur when you interact directly with the device. You can save the search results to the included SD card or a flash drive. You can connect one of the special MAGUS monitors, which are mounted directly on the camera and create a complete display system.

Microscope Installation

There are two ways to install the camera on the microscope: in the trinocular tube or in the eyepiece tube. In either case, you will need the C-mount adapter from the microscope package to connect the devices. An adapter ring for the tube diameter is also used for installation in the eyepiece tube.

Key features:

• Shoot in 4K (3840x2160px) or Full HD (1920x1080px) resolution depending on the type of connection
• Connection to an external display or computer via HDMI, USB 3.0, or Wi-Fi is possible
• High frame rate of 30fps
• The SONY Starvis color CMOS sensor provides 1028 mV of light sensitivity at 1/30th of a second and helps you shoot even in low light
• Supports additional devices that will make work more convenient and efficient

The package contains:

• Digital camera
• HDMI cable (1.5 m)
• USB 3.0 cable (1.5 m)
• Mouse with USB
• 32GB SD memory card
• USB Wi-Fi Adapter (2 pcs)
• 12V/1A AC Power Adapter (Euro)
• Installation CD with drivers and software
• User Manual & Warranty Card