Edan SE601 Electrocardiograph - 3/6 Channels Interpretive
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
The electrocardiograph has been designed for every work situation.
Fully digital signal processing and bright, clear waveform on display.
Two identical versions but with different displays.
One with a 3.5-inch 192x164mm and one with a large 5.7-inch 320x240mm display capable of showing up to twelve tracks at the same time.
Built-in alphanumeric keypad for easy
data entry.
Anti-paper jam system during printing.
Large internal memory for storing traces (50 LTD440 ECGs - 100 ECGs LTD445S).
Ability to export ECGs in XML format.
- Lightness and compactness
- Multi-language support
- 12 leads collected and amplified at the same time, the waves of the 6-channel ECG are displayed and recorded simultaneously
- High resolution thermal printer, recording rate result ≤150Hz
- Recording formats of your choice
- Large keypad design, separate numbers and alphabet keys for easy use
- Auto mode, manual mode, rhythm mode, and R-R mode of your choice
- Convenient system setup and file management usage
- Automatic measurement and automatic interpretation of your choice
- Warning information for disconnected lead, no paper and low battery etc.
- Built-in high-capacity rechargeable lithium battery
- Automatic baseline adjustment for optimal recording
- Print support period and print arrhythmia alarm.
- Automatic LCD background light switch-off, auto-off function and selectable voice printing for patient information
Specifications:
- Safety Standards: IEC 60601-1: 1988+A1+A2, EN 60601-1:1990+A1+A2, IEC/EN60601-1-2: 2001+A1, IEC/EN60601-2-25, ANSI/AAMI EC-11
- Classification: Anti-shock type: Class I with internal power supply
- Anti-shock grade: Type CF
- Degree of protection against dangerous water ingress: Ordinary equipment (Sealed non-waterproof equipment)
- Disinfection/sterilization method: See user manual for details
- Degree of safety for applecation in the presence of flammable gases: Equipment not suitable for use in the presence of flammable gases
- Working mode: Continuous operation
- EMC: Group, Type A
- Size: 310×322×101mm
- Weight approx: 2.6kg (without registration card and battery)
- Screen: SE-601A: 3.5 inch STN LCD 192*64 pixels, SE-601B: 5.7 inch STN LCD screen 320*240 pixels
- Environment: Transport and storage Labour
- Temperature: -20 ºC ~ +55 ºC +5 ºC ~+40 ºC
- Relative humidity: 25%~93% non-condensing, 25%~80% non-condensing
- Atmospheric pressure: 700hPa ~1060hPa 860hPa ~1060hPa
- Power supply: Mains power supply: Nominal input voltage = 100V~240V, Nominal frequency = 50/60Hz, Nominal input current = 70VA
- Built-in lithium battery:
Nominal voltage = 14.8V
Nominal Capacity = 2200mAh
When the battery capacity is full, the electrocardiograph can operate normally
for about 6 hours; about 280 ECGs of 3×4+1rhy can be recorded in automatic mode.
Charging time needed: 5 hours
Charging Mode: Constant Current/Voltage
Charging Current (Standard) = 0.2C5A (320mA)
Charging voltage (standard) = (16.8-0.1V)
Life cycle ≥ 300 times
- Current consumption: 70VA (max)
- Fuse: T1AL250VP Ø5×20
- Recording: Recorder: Thermal dot-matrix printer
- Registration paper: Folded paper
- Paper width: 110mm
- Effective width: 104mm
- Paper speed: 5mm/s, 6.25mm/s, 10mm/s, 12.5mm/s, 25mm/s, 50mm/s ±3%
- Data accuracy: ±5% (x-axis), ±5% (y-axis)
- HR Recognition Technique: Peak-to-peak detection
- HR range: 30 BPM ~300 BPM
- Accuracy: ±1BPM
- ECG Unit Leads: 12 standard leads
- Acquisition mode: 12 leads simultaneously
- A/D resolution: 24-bit
- Constant Time: ≥3.2s
- Frequency response: 0.05Hz ~ 150Hz (-3dB)
- Gain: 2.5, 5, 10, 20, 10/5, AGC (mm/mV)
- Input Impedance: 50M (10Hz)
- Input Circuit Current: ≤10nA
- Input voltage range - Calibration voltage: 1mV±2%
- DC offset voltage: ±600mV
- Noise: - Multi-channel crosstalk: ≤0.5mm
-Filter
AC Filter: On/Off
DFT Filter: 0.05/0.15/0.25/0.5/0.32/0.67Hz
EMG Filter: 25Hz/35Hz/45Hz/OFF
Low-pass filter: 150Hz/100Hz/75Hz
- CMRR ≥115dB
- 1000Hz sampling rate
- Patient leakage current: - Patient auxiliary current: - Dielectric strength: 4000V rms
- External Input/Output (Optional) Input ≥100k; Sensitivity 10mm/V±5%;
- Single-ended
- Output ≤100 ; Sensitivity 1V/mV±5%;
- Single-ended
Equipment:
- Electrode Set
-Gel
-Paper
- Power cable
- User manual
