NEW HOSPIVAC BR surgical aspirator with 2 x 2l jars and Rechargeable Battery

NEW HOSPIVAC BR is indicated in the professional aspiration of body fluids, tissues or bone fragments in patients during or after surgery.

It can work with two types of power supply:
- 220-230V / 50-60Hz mains, with special internal AC/DC power supply
- with internal power supply (12Vdc – 20A lead-acid battery).

The electronic management system allows suction to be carried out via foot control and to be able to perform suction in both vessels thanks to the electronic diverter without the need to turn off the equipment.

The acoustic alarm and a LED light indicate the battery status. The Energy-Saving function allows the pressure sensor to reduce the motor speed by 50% when the equipment is switched on and not vacuuming. This increases battery life and reduces noise.

Appliance designed to offer ease of transport and continuous use.

Thanks to these features and the performance it is equipped with, this device is particularly suitable for use in the operating room, hospital ward, for the aspiration of body fluids and for applications in gynecology and dermatology (liposuction).

Built with a plastic body with high thermal and electrical insulation in compliance with European safety regulations, the device is supplied with 2 complete sterilizable polycarbonate suction jars and with overflow valve and is equipped with a suction regulator and vacuum gauge located on the front panel. A version with foot control and collection flow diverter is available on request.

The electronic management system on the front panel allows suction to be carried out via foot pedal control and to be able to vacuum liquids in both jars without turning off the equipment and connecting again to the second jar.

Main uses:
-Emergency
-Operating room
- General Surgery
-Neurosurgery
- Liposuction
- Dental Practice
-Gynaecology

- Motor: 12V (no lubrication and/or maintenance)
- Power supply: 220-230V / 50-60 Hz with internal AC/DC power supply
- Internal Pb battery (12Vdc – 20A): Autonomy 250 min – charging time 8 hours
- ISO 10079-1 Classification: High vacuum / High flow
- Max suction: -0.85 Bar -85 kPa -637.5 mmHg
- Power consumption: 90 VA
- Fuse: 1 x F 4A L 250V
- Noise level: min 60.5 dB – max 64.9 dB
- Operation: Continuous (if connected to the mains)
- Weight: 20 Kg
- Dimensions: 46x85x42 cm
- Warranty: 2 years
- Place of manufacture: ITALY

- 2 Autoclavable Pots with Overflow Valve
- 2 Autoclavable Silicone Tubes 8×14 mm length 150 cm + n.2 Conical Connectors ø 10-11-12mm
- 2 Antibacterial and Hydrophobic Filters (single-patient)
- Foot control
- Power cable with Schuko plug