Control Test

Bowie & Dick tests 3M ready to use.The 3M Comply 00135 disposable pack consists of two blocks of porous paper material and two indicator sheets inserted one in the middle of the two blocks of porous material and one in the middle of the lower block of the pack. The whole is packaged in a non-woven fabric (TNT) sheet, closed by an adhesive label and on the latter there is also a chemical process indicator.The 3M Comply 00135LF complies with the requirement...

Ready to use.- Stable color variation- High sensitivity, detects any cycle anomalies- Positive: uniform green color- Negative: uniform red color. Incorrect time and/or temperature and/or steam pressure.Bowie & Dick's ready-to-use test is specially designed to verify the correct functioning of steam autoclaves and their ability to sterilize porous devices (swabs, drapes, gowns, non-woven fabrics...)-High sensitivity: detects anomalies- Easy interpre...

STEAM STERILIZATION INDICATOR TYPE 4 – pack 250 to double stripThe multi-variable Class 4 Steam Sterilization Indicators are designed to be used in steam sterilizers operating at 134° C - 3.5 min.The indicator strip can be used in each pouch and will provide the guarantee of steam penetration into the instrument packs inserted in the sterilizer.The water-based, non-chemically toxic indicator in accordance with ISO 11140 - 1 will show a clear change in colour from blue to blac...

INDICATOR FOR ETHYLENE OXIDE STERILIZERS – pack 250 to double stripEthylene oxide (EO) Type 5 sterilizer indicators are designed to be used with E.O. sterilizers in accordance with ISO 11135.The indicator strips can be used in any instrument bag and provide a guarantee of E.O gas penetration into the bag.The water-based, non-chemically toxic indicator in accordance with ISO 11140 - 1 will show a clear change in colour from white to yellow after successful sterilisation.S...

EMULATION INDICATOR (STEAM) TYPE 6 – pack from 250 stripsEmulation indicators (Type 6) are designed to test steam sterilizers operating at 121°C - 15 min and 134° C - 3.5 min.The verification indicators can be used in each bag / package of instruments and will provide the guarantee of steam penetration into them and the presence of all the critical parameters required in the steam sterilization cycle.The water-based, non-chemically toxic indicator in accordance with ISO 11140...

TYPE 5 STEAM STERILIZATION INDICATOR- conf. from 500 pcs- Non-toxic/lead-freeIt allows sterilization conditions to be reconfirmed inside trays or containers.Steam supplement: 134°C - 3.5 min, 121 °C - 15 min.Complies with ISO 11140 - type 5.Packaging and user manual in GB, IT, FR, ES, PT, GR, DE.- shelf life: 5 years from the date of manufacture- Packaged in easy-to-dispense cartons- Clear transition of the indicators from blue to ...

Helix Test Sterilization Test + 100 Disposable IndicatorsHelix test is a physical test that allows you to verify the ability of vapor to penetrate hollow bodies. A standardized system is used for the test that complies with the technical regulations currently in force. The test must be passed by all autoclaves that declare the possibility of sterilization of hollow bodies such as handpieces, turbines, pipes, etc.Features:- Non-toxic paper backing weig...

The GIMA range of belts is specifically formulated for bagging and at the same time to visually show that the packaging has successfully completed the sterilization cycle. The coating of the different tapes consists of particularly resistant impregnated paper, which guarantees excellent malleability during application. These sterile tapes are easy to unroll and can be torn off by hand without any difficulty. Special adhesives, specifically formulated to withstand high levels of temperature an...

SteamPlus Sterilization Test - 100 pcsORGANIC SUPPLEMENTS SteamPlus (100 pieces) Chemical tests for validation of the sterilization cycle Suitable for all types of autoclaves.
Pack of 100 pcs.
The STEAMPlus chemical integrator indicator is a product with advanced technology capable of guaranteeing the correct monitoring of sterilization parameters with saturated steam both in cycles at 134°C and in th...

The GIMA range of belts is specifically formulated for bagging and at the same time to visually show that the packaging has successfully completed the sterilization cycle. The coating of the different tapes consists of particularly resistant impregnated paper, which guarantees excellent malleability during application. These sterile tapes are easy to unroll and can be torn off by hand without any difficulty. Special adhesives, specifically formulated to withstand high levels of temperature an...

Bowie & Dick Sterilization Test - 20 Tests
Bowie and Dick TestThe BOWIE & DICK is a physical test that allows you to verify the ability of vapor to penetrate porous bodies. A standardized "test pack" that complies with the currently applicable technical regulations is used for the test. The test must be passed by all autoclaves that declare the possibility of sterilization of porous loads, such as gauze, bandages, gowns and fabrics in general.

BOWIE AND DICK TEST PACK - conf. from 20 pcs - Dimensions: 123 x 123 x 16 mmUsed for daily monitoring of pre-vacuum steam sterilizers.The Bowie and Dick test is intended to test the steam sterilizer at the beginning of the day (as per ISO 11140).The success of the test authorizes the use of the sterilizer.The Bowie and Dick test detects faults such as air leaks, insufficient vacuum, and inadequate vapor penetration.Packaging and manual in GB, IT, ES, ...

Spore Sterilization Test - 20 tests SPORES IN VIAL Kit containing 20 pieces spores for biological controls. Suitable for all types of autoclaves. The vials must be inserted into the sterilization chamber, even with the presence of load.Perform the cycle, at the end remove the vial carefully as it is hot and pressurized.Let it cool for about 10 minutes then activate it, pressing it with your fingers, always keeping it vertical. The chemica...

Spores in vials for sterilization tests. Kit containing 20 pieces spores for biological controls. Suitable for all types of autoclaves.Class 5.

SEALING CHECK- conf. from 250 pcs- Dimensions: 175 x 75- Suitable for all rotary traysealersThe ISO 11607 standard specifies to carry out a daily inspection routine of heat seals.The airtight seal check is a method of performing the required test, documenting the day, the person performing the test, and clearly showing the results of your heat sealer's ability to properly heat and seal the bag.When it is placed inside a bag that is subsequently sealed and ...

Attest 3M Chemical Indicator, 1243A - Pack of 1000 pcs.Class 5 supplement compliant with the requirements of the ANSI/ AAMI/ISO 11140-1:2005 standard.- Moving Front Ink technology provides an easy-to-read pass or reject result- Can be used in steam sterilization cycles 118-138°C (250-275ºF)- Response related to a biological indicator according to three time/temperature ratios under ideal steam sterilization conditions- Identifies non-sterile instrum...

BOWIE AND DICK HELIX TEST PACKHelix devices and their indicators have shown that they detect faults during each cycle much earlier than other chemical indicators/integrators.EN 285:2009 specifies that Helix (Hollow A) tests are to be used in the same way as Bowie and Dick tests as well as batch monitoring when hospitals sterilize loads containing instruments with cavities.In addition, the Bowie and Dick Helix test is mandatory for Bench Top Steam Class B sterilizers.-...

Vapor Line Sterilization Test - 250 pcsThe Vapor Line Integrator Indicator is a single-use saturated steam sterilization indicator that accurately monitors sterilization conditions in cycles between 121°C and 134°C.
The operation of the integrator indicator is based on the migration of a dark bar placed inside a white window until the signal of sterilizing (PASS) or non-sterilizing (FAIL) conditions is reached. No interpretation of the toning color is re...

The GIMA range of belts is specifically formulated for bagging and at the same time to visually show that the packaging has successfully completed the sterilization cycle. The coating of the different tapes consists of particularly resistant impregnated paper, which guarantees excellent malleability during application. These sterile tapes are easy to unroll and can be torn off by hand without any difficulty. Special adhesives, specifically formulated to withstand high levels of temperature and h...

MOVING FRONT TYPE 5 SUPPLEMENT - conf. from 1.000 pcs- Non-toxic/lead-freeThe Moving Front 134°C -3.5 min supplements provide the best possible interpretation in the event of any failure in the steam sterilization cycles.If the temperature is not reached or the holding time is too short, the dark color will not reach the acceptance area.Complies with ISO 11140 - type 5.User manual in GB, IT, FR, ES.- shelf life: 5 years from the date of manu...

3M Comply Lead-free 3M 1322 Steam Press Indicator Tape 18 mm - Pack of 28 pcs.

Biological incubator with autonomous feeding B-Test PlusBiological incubators are a product developed for the incubation of biological indicators.The incubators consist of a frame, an ABS cover, an aluminum heating block for the tube/biological indicators and an electronic board for the automatic temperature management of the heating block.
B Test PLUS with 220 V stand-alone power supplyThe biological incubator is a product developed for...

Indicator for water vapor autoclave sterilization under pressure from 1 to 2 bar 120°C/135°C.No special storage conditions.Safety and reliability.Japanese production.The word "Sterilisé" and the design of three stars turn from pink to brown to indicate the effectiveness of sterilization at 121°C for 15 minutes or at 134°C for 3 minutes and 30" and to black to indicate a safety margin at 121°C for 20 minutes and 134°C for 5 minutes.Specifications:- EAN13: 3...

100 Surface Pads for use with Bioluminometer LX25The Clean-Trace ATP Test surface and water swabs are packaged in cartons containing 10 envelopes and each envelope contains 10 buffers. The labeling of the sales package presents the following information: identification of the product, the manufacturer, the quantity, the reference number, the batch number, the expiration date and the recommended storage conditions. The material used for packaging does n...

100 Water Control Pads for Use with LX25 BioluminometerThe Clean-Trace ATP Test surface and water swabs are packaged in cartons containing 10 envelopes and each envelope contains 10 buffers. The labeling of the sales package presents the following information: identification of the product, the manufacturer, the quantity, the reference number, the batch number, the expiration date and the recommended storage conditions. The material used for packaging ...

Instrument Protector 3M Attest 13911, 5x12.5 cm - 10 packs of 100 pcs. for a total of 1000 pcs.It covers the pointed and sharp edges of surgical instruments during steam or EtO sterilization.Reduces the chance of bag puncture during sterilization.Indicators on the protection verify the processing of steam or EO gas. Unleaded.Scissors not included.

Instrument guard 3m attest 8,9x16,8 cm - 13913 - pack 1000 pcs.

Trace Bioluminometer LX25CLEAN TRACEATP HYGIENE MONITORING SYSTEMINTENDED USEClean-Trace is a system for hygiene control by means ofthe detection of ATP that exploits the bioluminescence generated by theadenosine triphosphate (ATP) to measure the amount oforganic material present on a surface or in waterrinsing contaminated instruments (e.g. endoscopes).Disposable product for professional use only. The organic...