by credit card, Paypal and bank transfer.
with BRT, DPD and FedEx couriers
via Whatsapp + 39.371.43.61.201
The PB560 is a pressure-volumetric ventilator, suitable for invasive and non-invasive ventilation.
The device can be used both in clinical and home environments and can be used for weaning the patient, switching from invasive ventilation to mask ventilation.
The device can be used on both adult and pediatric patients (>5 kg) and is designed for mobile use.
It is used for the treatment of patients suffering from both acute and chronic medium respiratory failure.
• Leakage system ventilation: CPAP, S, ST and T
• Valved ventilation: PCV, aPCV, PSV, VCV, aVCV, (P) SIMV and (V) SIMV
• Setting a guaranteed target volume
• Setting a Vt Sigh (sigh) in volumetric mode
• Internal battery life of up to 11h with the possibility of extending the autonomy with the specially designed uninterruptible power supply, Power Pack
• Bag for carriage in a wheelchair
• Low weight and usable on commercial aircraft according to FAA requirements.
• Large display
• Numerical and graphical monitoring of ventilation parameters
• Flow and pressure curves on the display during operation
• Ability to store up to 48 hours of curves and 12 months of trends.
Specifications:
Pressure 5 - 55 mbar
Tidal volume 50 - 2000 ml
Respiratory rate 1 - 60 bpm
I/E ratio (Ti/T) 1:4 - 1:1 or 20% to 50% of the breathing period
Inspiratory trigger 0P - 5
Expiratory trigger 5% - 95%
Pressure boosting ramp 1 - 4
Monitored parameters
Minute-inhaled ventilation
Inspiratory and expiratory tidal volume
Inspiratory and end-expiratory pressure
Respiratory rate
I/O or I/T ratio
Inspiratory and expiratory time
Losses
FiO2
Maximum inlet oxygen flow 15 L/min with pressure 50 Kpa
Dimensions in mm (width x height x depth) 235 x 154 x 315
Weight 4.5 kg
Temperature range
+10°C to +35°C
Ambient pressure range 600 - 1100 hPA
Electrical connection 115 - 230 VAC , 50 - 60 Hz
Maximum power consumption max 180 VA
Internal lithium-ion battery 25.2 V - 4.8 Ah - 11h of autonomy
Charging Time:
in stand-by approx. 6h
During operation approx. 13h
Product class according to Directive 93/42/EEC IIb
Classification according to EN 60601-1
Type of protection against electric shock
Protection class II
Type BF
Average sound pressure level Approx. 30 dB(A)
Alarm signal sound pressure level approx. 65 - 85 dB(A)