Aeroneb Aerosol Solo with Starter Kit
by credit card, Paypal and bank transfer.
with BRT, DPD and FedEx couriers
via Whatsapp + 39.371.43.61.201
The Aeroneb Solo System, consisting of the Aeroneb Solo Nebulizer and the Aeroneb Pro-X Control Module, is a portable system for continuous or intermittent nebulization of medication during mechanical ventilation or positive pressure respiratory support. The Aeroneb Solo system is suitable for use on infants, children and adults.
The OnQ Aerosol Generator, contained in the nebulization unit, consists of a micro-perforated cap plate and a vibrating element, whose micropump activity nebulizes the drug. A high number of holes (about 1000), made with very high precision, guarantees precise control of the size of the aerosol particles. Thanks to the force of gravity, the drug comes into contact with the aerosol generator, where the liquid is pushed through the microperforated plate and transformed into an aerosol.
The Aeroneb Solo Nebulizer has been designed to be compatible with standard breathing circuits. During operation, it does not require any modification of ventilation parameters and allows medication to be topped up without interruption of respiratory support. A T-adapter allows the nebulization unit to be connected to the patient circuit.
The tee adapter fittings are standard 22mm male and female (conical ports) compatible with standard ventilator patient circuits.
The Aeroneb Pro-X Control Module allows for intermittent (30 min. cycle) or continuous (continuous) nebulization of medications. By connecting an infusion tube on one side to the Luer adapter of the nebulizer and on the other to an infusion bag, and thanks to an infusion pump or syringe pump, a constant dosage of the medication is ensured.
The Aeroneb Solo System is extremely quiet during operation: 35 dB measured at 0.3 m distance. The Aeroneb Pro-X control module works with a power supply c.a./c.c.. Thanks to an internal, rechargeable battery, an autonomy of up to 45 minutes is guaranteed. As it operates without compressed gas, it's suitable for portable applications.
The Aeroneb Solo Starter Kit also includes a universal mounting bracket and mounting adapter that allow the Control Module to be attached to an IV pole or standard fan posts.
Product code: AEAG-AS3000-NE
- Minimum flow rate: > 0.2 ml/min. (average flow rate tested = 0.38 ml/min.)
- Average particle size generated: average aerodynamic diameter of mass MMAD): 3.4 μm geometric standard deviation (GSD): 2.4
- Residual volume:
The performance of the nebulizer may vary depending on the type of medication used. Noise generated during nebulization: 35 dB detected at 0.3 m distance.
Power supply:
- Voltage: 100-240V
- Current: 0.6-0.3A
- Frequency: 50-60 Hz
- Power source: c.a./c.cadapter. (AG-AP1040-XX) Friwo (100 to 240 V input c.a. 50-60 Hz, 9 V output) or internal rechargeable battery (nominal output 4.8 V)
Consumption:
Patient isolation: The control module's circuitry provides 4 kilovolts (kV) of patient isolation, in accordance with IEC 60601-1 standards.
- Rechargeable nickel metal hydride (NiMH) battery.
Control Module:
- Dimensions: 33 mm x 75 mm x 131 mm
- Weight: 230 g (including battery + cable)
- Control module cable: 180 mm length
- Power supply cable c.a./c.c.: 210mm length
The nebulizer and its components are latex-free.
Aeroneb Solo Starter Kit comes complete with:
- Control Module – Aeroneb Pro X
- Nebulizer Connection Cable
- Aeroneb Solo, nebulizer 2 pcs
- T-Connectors with Cap, for Adults; Luer connectors
- Universal Fixing Bracket for Aeroneb
- Fixing Adapter for Aeroneb
- External power supply
- Operating Manual
Can be ordered separately:
- Pediatric T-Connector, for Aeroneb Solo (10 Pack)
- Pediatric T-Connector with Neonatal Adapter, for Aeroneb Solo (10 Pack)
- Neonatal T-Connector, for Aeroneb Solo (Pack of 10) 12mm M / 12mm F
