Rescue Life 7 AED Defibrillator - English

Rescue Life is an external defibrillator with monitor.

The RESCUE LIFE has been designed to be used both in hospital and in out-of-hospital emergencies (BLS and ALS protocols).
Lightweight, easy to carry, attractive line, ergonomic shape, attention to detail.
The IPX4 rating ensures operation even in adverse weather conditions.

Totally Italian production.

5.7" or 7" TFT LCD display (Rescue Life 7) in colour
Bright, high resolution, with a wide viewing angle that allows you to see 6 ECG channels simultaneously. (with 5-lead cable)

Data management
For all AED models, the memory is based on a 4 GB flash disk for 300 hours of recording.

Asynchronous and Synchronous Mode
- in asynchronous defibrillation: Rescue is recommended for patients with the following symptoms: loss of consciousness, absence of normal breathing and absence of signs of circulation and heartbeat
- in synchronous defibrillation: Rescue is recommended for patients with ECG reporting of atrial fibrillation.

3 operating modes: manual, AED, consultative
- in manual mode RESCUE LIFE is intended to be used by healthcare personnel trained in cardiopulmonary resuscitation.
Only 3 operations: energy selection from 1 to 230J, energy charging and discharging
- in AEDmode, RESCUE LIFE is intended to be used by personnel authorized by a physician or medical director. Voice prompts and on-display prompts assist the operator during cardiopulmonary resuscitation (CRP) operations, automatically charging to 150J when an ECG rhythm is detected to be defibrillated
- in Advisory mode, the system alerts in cases where defibrillation is recommended, leaving the operator to choose the energy and charge

Display
- High contrast TFT Color LCD 5.7" (320x240 pixels)
- ECG through the defibrillation pads (1 track) or via the 5-lead patient cable x 3 or 6 tracks.
- Automatic change when the cable is inserted for the patient
- Filters: 50/60 Hz baseline, EMG
- Heart rate indicator

ECG monitoring
- Bandwidth: 0.5 to 120 Hz (-3dB) with off filters

Filters for ECG parameters
- speeds 5, 10, 25, 50 mm/sec.
- gain 2.5, 5, 10, 20, 40 mm/mV with the patient's cable; automatic with plates.
- Digital HR report on the display from 20 to 300 BPM (±2%)
- Configurable HR (heart rate) alarm up to 250 BPM, HR minimum 20 BPM

Printer
- Manual/auto-print mode (10" pre and post)
- Integrated thermal printer for ECG traces and event documentation including HR/SpO2
- print speeds 5, 10, 25 and 50 mm/sec.
- Paper width: 58 mm

Safety
- Two handles for safety during shock
- ECG detection isolation class CF
- Internal energy discharge after 30 sec. of standby from charging

Feeding
Internal Ni-Mh battery (Rescue Life 5.7")
Internal Li-ion battery (Rescue Life 7")
(95% charging time = 2 hours)
- Universal charger 110/240 VAC, 50/60 Hz
- Size: 36x24x34 cm
- Weight: 5.5 kg

General information
Memory: 4GB internal flash up to 300 hours of ECG data, events and visualizations

Internal Li-ion battery
Printer
5-Lead Patient Cable (to display 6 Channels)
1 roll of paper
2 disposable plates
2 reusable adult and pediatric electrodes
Universal charger

(red bag excluded)