by credit card, Paypal and bank transfer.
with BRT, DPD and FedEx couriers
via Whatsapp + 39.371.43.61.201
The Ermenrich NetGeeks NP40 All-In-One is a digital cable tester designed to trace twisted pairs and telephony cables, to test lines for faults and installation errors, to measure cable length and distance to the point where an interruption has occurred (open circuit) or a short circuit is present. This tool will prove to be very practical for technicians who implement and maintain a computer network or telephone network within an office, an entire building or a house.
In its basic operating mode, this tool can check for damage on individual electrical wires within a cable: open circuits, short circuits, twisted pairs. Using the cable length measurement mode, you can measure the total length of cables within 200 meters, as well as the distance to the point of failure. If required, calibration and measurements can be performed in TDR (reflectometry in the time domain) with high accuracy.
The blinking port function can be used to accurately find the port on the network switch or router to which the test cable is connected. The PoE test identifies the type of PSE and detects the midspan/endspan link. This instrument can also measure voltage and polarity. The tester receiver can be set to NCV mode to detect the presence of voltage without any contact.
The transmitter and receiver are battery-powered (not included).
Key features:
- Cable tracing, line testing for faults and installation errors
- Cable length measurement using TDR (pulse reflectometry) technique
- Distance measurement from short circuit or open circuit
- PoE test with voltage measurement, PSE type identification, midspan/endspan identification
- Flashing port and NCV functions, battery powered
The package contains:
- Transmitter
- Receiver
- Remote Unit
- RJ11 patch cord
- RJ45 patch cord
- Alligator clip
- DC Cable
- Earphones
- USB Type-C Cable
- Carrying bag
- User Manual & Warranty Card
Brand | Ermenrich |
Guarantee | 5 лет |
EAN | 5905555016948 |
Package size (LxWxH) | 23x16x5 cm |
Shipping Weight | 0.52 kg |
=== Delimiter === | Transmitter |
Doors | PoE, Scan, Length/Flash, Cont |
Types of traceable cables | telephone cables, common electrical cables, STP/UTP network cables (CAT5E, CAT6, CAT6A) |
Types of cables tested | STP/UTP network cables (CAT5E, CAT6 and CAT6A) |
Maximum length of the tested cable, m | 600 |
Cable length measurement | Yes |
Cable testing | + (open circuits, short circuits, crossed, inverted and split pairs, crosstalk) |
Flashing port function | +, (full duplex/half duplex, auto/non-auto negotiation, 10/100/1000Mbit/s) |
Cable detection | Yes |
PoE Testing | Yes |
Voltage polarity detection | Yes |
=== Delimiter === | Cable length measurement |
Measurement method | Reflectometry of a pulse in the time domain (TDR) |
Units of Measurement | meters/yards, feet |
Measuring range, m | 2.5 — 200 |
Error | 3 (±0.5 m) |
Measurement of the distance to the break in the case of open circuits | Yes |
Measurement of the distance to the short circuit | Yes |
Calibration | + |
Minimum cable length for calibration, m | 10 |
Calibration Error, % | 2 (±0.5 m) |
=== Delimiter === | PoE Testing |
PoE Power Type Test (PSE) | standard (IEEE 802.3at/af) / non-standard |
Midspan/endspan identification | Yes |
Operating Voltage (DC), V | 5 — 60 |
=== Delimiter === | Key features |
Maximum operating current, mA | |
Protection | Input voltage: 48 V, current: 5 mA |
Display | LCD |
Display resolution, px | 128х64 |
Display backlight | Yes |
Feeding | rechargeable via USB Type-C cable (included), 3 rechargeable AAA batteries (not included) |
Low battery indicator | Yes |
Auto Power Off | 15 min, 60 min, 30 min |
Operating Temperature Range, °C | −10... +60 |
Operating Humidity Range, % | 20… 70 |
=== Delimiter === | Receiver/Remote Unit |
Doors | RJ45, Earbuds |
Adjustable sensitivity | Yes |
Non-contact phase tester (NCV) | Yes |
Flashing light | Yes |
Maximum operating current, mA | |
Feeding | 9V battery (not included) |
Operating Temperature Range, °C | −10... +60 |
Operating Humidity Range, % | 20… 70 |