Cardioline VSIGN200C Patient Monitor with NIBP, SPO2, ECG, Temperature and Respiration

Monitor Cardioline VSIGN200C NIBP+SPO2+ECG+T+RESP

The Vsign200 is a small, lightweight (1.9 kg/4.2 lbs) and reliable (IPX2 shock- and splash-proof) patient monitor.
Its design makes patient care effective in a non-acute clinical setting, but it is also suitable for rapid capture of vital signs in the emergency room.sign200 is a small, lightweight (1.9 kg/4.2 lbs) and reliable (IPX2 shock- and splash-proof) patient monitor.
Its design makes patient care effective in a non-acute clinical setting, but it is also suitable for rapid capture of vital signs in the emergency department.

The 12V car adapter and a specially designed ambulatory mounting bracket are available to meet all your transport needs.

A high-capacity rechargeable battery lasting 5 hours is included with the device while a battery lasting 10 hours is available as an option, to facilitate mobile rescue without mains power.

vsign200 has many configuration possibilities to meet the different needs of end users, including secure data transfer via Wi-Fi or Ethernet (RJ45) network card.

Its main features are:

LCD + LEDDisplay: High resolution, no distortion, high brightness, large LCD viewing angle.
Simple operation with control knob.
Portable.
Non-invasive blood pressure measurement based on the oscillometric method. Specific modalities for adults, pediatrics and infants.
Dual-wavelength SpO2 (red and infrared) measurement method
Modular design that is easy to maintain.
Monitoring of several parameters at the same time, alarm signals are generated when a parameter exceeds its limit.
Signal and parameters are saved when there is an alarm, a maximum of 3500 groups of alarm data can be saved.
All alarm recordings can be reviewed later.
No increase in current leakage with other instrumentation, as per safety regulations.
Powered by AC, internal battery or CD power on vehicles, the optional high-capacity internal Li-ion battery can sustain 10 hours of normal operation.
Drip proof design, useful for Emergency use.
Waveforms can be frozen and saved, and the SD card can be used for data storage.
ECG monitoring system one standard channel. For greater safety, an isolated electrical amplifier is used, as per regulations.
Capable of displaying the ECG signal in the presence of pacemaker pulses with 2mV amplitude
The monitor has defibrillator protection and the ECG module is CF type.
Different types of temperature probes can be used.
VSiSign 200 can be configured with various modules that support monitoring for the following physiological parameters:

ECG Electrocardiograph, 3/5 selectable channels,
NIBP Non-Invasive Blood Pressure, Oscillometric Method, SYS/DIA/MAP
SPO2 Oxygen Saturation, Golden Standard Module
RESP Breath, Thoracic Impedance Method
TEMP Temperature, Fast Sensing Module

• Li-Ion battery
• ECG cable 3 wires IEC button
• 10 disposable electrodes
• Adult cuff (24-32 cm) with connection tube
• Adult SpO2 probe with clamp
• User manual
• Cardioline warranty: 24 months

The temperature probe is not supplied and must be purchased separately