Pressovolumetric pulmonary ventilator VEMO-150

Pressovolumetric pulmonary ventilator VEMO-150
Life Support Ventilation

Pressovolumetric pulmonary ventilator for home use and transport.

EOVE's VEMO 150 ventilator can be used for mechanical ventilation of ventilator-dependent or non-ventilator patients.
Allows pressure- and volume-controlled ventilation of adult and pediatric patients as directed by the treating physician. Provides continuous or intermittent ventilation support to adult or pediatric patients weighing at least 3.5 kg (8 lb).
The VEMO 150 is designed for use in homes, institutions and hospitals as well as a portable device for invasive and non-invasive ventilation.
  
The VEMO 150 ventilator can be configured in single, double or leakage patient circuit ventilation.
It has a wide range of ventilation modes with volumetric, pressure, and mixed control.
The high performance of the turbine and the possibility of delivering a 30 ml Vt allow treatment for pediatric patients weighing 3.5 kg and with high silence. (29dBA in Ped config - 30dBA in adult config)
Equipped with an 8" color touch screen display. - Internal memory 8 GB
Possibility to set up to 4 different ventilation programs with 15 selectable modes.
Great flow and pressure stability, thanks to the high performance of the turbine (max flow over 220l/min; response time Internal battery with autonomy up to 6 hours, designed for connection to one/two external batteries with autonomy
up to 15/24 hours.
Prepared for connection to an oxygen source, maximum flow 20 lt/min.
Possibility to connect: remote alarm; FiO2 Reading Kit, SaO2 and Transcutaneous SENTEC Kit.

The VEMO 150 fan can be used with the following ventilation modes:
(A)VCV: Volume-assisted/controlled ventilation (with exhalation valve)
(A)PCV: Pressure-assisted/controlled ventilation (with exhalation valve)
PSV: Support pressure ventilation (with exhalation valve)
MPV: Volume-controlled ventilation with mask or mouthpiece
MPP: Pressure-controlled ventilation with mask or mouthpiece
PSV-VT: Volume-controlled support pressure ventilation (with exhalation valve)
V-SIMV: Volume synchronous intermittent mandatory ventilation (with exhalation valve)
P-SIMV: Mandatory intermittent synchronous pressure ventilation (with exhalation valve)
CPAP: Continuous Positive Airway Pressure (with Leak)
ST: Timed and synchronized ventilation (with loss)
PAC: Pressure Assisted/Controlled Ventilation (with Leakage)
VTS: Synchronized ventilation with volume target (lossy)
C-FLOW: Continuous flow

Specifications of the parameters that can be set:
Support pressure (PS) - 5 to 59 mbar
IPAP - 6 to 50 mbar
PEEP - 0 (off) to 25 mbar
EPAP - 4 to 25 mbar
Tidal volume - 30 to 2500 ml
Respiratory rate - 5 to 80 bpm
Inspiratory Trigger : (Flow) Adjustable from 1 to 5 or AUTO or OFF
Expiratory Trigger : Adjustable from 10% to 90% either AUTO or via Ti max
Inspiratory time - 0.3 to 2.5 sec
Minimum inspiratory time - 0.3 to 2.5 sec or AUTO
Maximum inspiratory time - 0.3 to 2.5 sec or AUTO
Flux - rectangular or decelerated wave
Rise time - 1 to 5 (50-500 msec)
Pressure in CPAP mode - 4 to 20 mbar
Tidal volume in MPV/MPP mode - 100 to 2500 ml
Respiratory rate in MPV/MPP mode - 5 to 80 bpm or OFF
Bias Flow in MPV/MPP Mode - 1 to 20 l/min
Flow in C-FLOW mode - 2 to 60 l/min
Specifications of the monitored parameters:
(rounded reading values, available units: cmH2O, mbar, hPa)
Peak Inspiratory Pressure (PIP) - 0 to 99 mbar
Positive End-Expiratory Pressure (PEEP) - 0 to 60 mbar
Inspiratory tidal volume (VTI) - 0 to 4000 mL
Tidal volume expiratory (VTE) - 20 to 4000 mL
Total Respiratory Rate (Rtot) - Or to 99 bpm
I/E Ratio (I E) - 9.9:1 to 1:9.9
I/T Ratio (I/T) - 0 to 100%
Inspiratory Trigger: (Flow) with Adjustable or AUTO threshold
Expiratory Trigger: (Flow) with Adjustable or AUTO threshold
Inspiratory Time (I Time) - 0 to 9.9 s
Exhale Time (E Time) - 0 to 59.9 s
Inspiratory volume per minute (Min VI) - 0 to 99.9l
FiO2 - 21 to 100%
Loss compensation - 0 to 200 l/m

VEMO 150 ventilator (storage station with display and ventilation module), power supply and cable, standard transport bag, oxygen connector, double-way adapter (expiratory valve and flow sensor).